$295
4 oz. tin of board paste $25 value + 2 applicator pads $10 value with purchase
Your old edge-grain and hard plastic cutting boards are ruining your knife edges. Step it up with the Artisan Revere end-grain board that saves the environment and your knives' edges. Our end-grain boards are built right: to make your life easier. They keep your knives sharper, longer, are easy to maneuver, and they’re built to last a lifetime with minimal care.
Our Boards:
1. Are handcrafted with meticulous attention to wood selection & joinery.
2. Sanded smooth, soaked in food-grade mineral oil twice, dried, and finished with A/Rs Conditioning Paste.
Walnut, Cherry, and Maple keep your knife sharper for longer
Easy to pick up and maneuver thanks to deep, wide, well-buffed handle grooves
End-grain wood is safer for your family — it's proven to kill bacteria
Self-healing vertical fibers ensure minimal board scarring and are soft on knife edges
Feel confident when you cook thanks to completely non-slip 0.5" tall rubber feet
Rescued wood from premium quality off-falls are better for the planet
Made in the USA
Rescued off-falls from
sustainably managed forrest
Weight: 6-7 lbs.
EASY-GRAB HANDLES
Deep, wide, and well-buffed handle grooves make it easy to pick up and maneuver your board.
RUBBER FEET
0.5" tall rubber non-slip feet for safety and stability. Rubber feet: 1. absorb shocks, 2. keep the board's bottom dry, 3. provide an easier grip when moving, 4. increase board stability, 5. ensure your board NEVER slips. No more towel soaking & no more warped boards.
NO-SCAR END-GRAIN
Our boards are 100% rescued end-grain wood. That means your knife goes between the wood fibers when you cut, and your board won't scar or harbor bacteria. Healthier for you and your knife.
COMFORTABLE & SAFE
Every side, corner, and radius is completely softened and rounded by hand. This ensures easy maneuvering and that you never hurt yourself on an edge.
With warm or hot water, dish soap, and a sponge. If there is stuck-on food you can remove it with a bench scraper. It is very important to wash the cutting surface thoroughly. We also recommend wetting all six (6) sides to prevent warpage and bowing.
With a dish towel. Make sure to dry your board thoroughly - i.e. dry all six (6) sides.
On one of its edge sides, so it is standing up. It's best to rest it on the counter against the wall with the 18” side on the counter. Storing your board on its edge speeds up the drying process and ensures that the top and bottom dry at the same rate, reducing the likelihood of bowing and warping.
If water absorbs into your board instead of beading you can re-apply. Alternatively, if your board looks dry, it most certainly is. Apply mineral oil with a paper towel or dedicated dish rag to all six (6) sides. 4 oz. is a good amount of oil. Your board can soak up even more.
Yes. Wait until the mineral oil has been fully absorbed (overnight is a good idea). A good conditioning paste, made from beeswax and mineral oil will seal your board. At a minimum, apply the board paste to the cutting surface with our applicator sponge. You may also apply to the other sides if desired.
We strongly recommend you avoid these on a wooden cutting board. Serrated knives have saw teeth. Saws are used to cut wood. Cleavers are essentially axes. Axes are used to chop wood. Avoid both and your cutting board will thank you.
Cutting boards are made to order and typically ship within 2 weeks of purchase. On occasion, we make a few extra boards, and they’re ready for shipment within 3-5 business days.
We do not ship cutting boards overseas.
Lorem ipsum dolor